12.4.3 Analysing Terms via the Foreign Interface

Each argument of a foreign function (except for the control argument) is of type term_t, an opaque handle to a Prolog term. Three groups of functions are available for the analysis of terms. The first just validates the type, like the Prolog predicates var/1, atom/1, etc., and are called PL_is_*(). The second group attempts to translate the argument into a C primitive type. These predicates take a term_t and a pointer to the appropriate C type and return TRUE or FALSE depending on successful or unsuccessful translation. If the translation fails, the pointed-to data is never modified.

12.4.3.1 Testing the type of a term

int PL_term_type(term_t)

Obtain the type of a term, which should be a term returned by one of the other interface predicates or passed as an argument. The function returns the type of the Prolog term. The type identifiers are listed below. Note that the extraction functions PL_get_*() also validate the type and thus the two sections below are equivalent.

        if ( PL_is_atom(t) )
        { char *s;

          PL_get_atom_chars(t, &s);
          ...;
        }

or

        char *s;
        if ( PL_get_atom_chars(t, &s) )
        { ...;
        }

Version 7 added PL_NIL, PL_BLOB, PL_LIST_PAIR and PL_DICT. Older versions classify PL_NIL and PL_BLOB as PL_ATOM, PL_LIST_PAIR as PL_TERM and do not have dicts.

PL_VARIABLE	A variable or attributed variable
PL_ATOM	A Prolog atom
PL_NIL	The constant []
PL_BLOB	A blob (see section 12.4.9.2)
PL_STRING	A string (see section 5.2)
PL_INTEGER	A integer
PL_RATIONAL	A rational number
PL_FLOAT	A floating point number
PL_TERM	A compound term
PL_LIST_PAIR	A list cell ([H|T])
PL_DICT	A dict (see section 5.4))

The functions PL_is_<type> are an alternative to PL_term_type(). The test PL_is_variable(term) is equivalent to PL_term_type(term) == PL_VARIABLE, but the first is considerably faster. On the other hand, using a switch over PL_term_type() is faster and more readable then using an if-then-else using the functions below. All these functions return either TRUE or FALSE.

int PL_is_variable(term_t)

Returns non-zero if term is a variable.

int PL_is_ground(term_t)

Returns non-zero if term is a ground term. See also ground/1. This function is cycle-safe.

int PL_is_atom(term_t)

Returns non-zero if term is an atom.

int PL_is_string(term_t)

Returns non-zero if term is a string.

int PL_is_integer(term_t)

Returns non-zero if term is an integer.

int PL_is_rational(term_t)

Returns non-zero if term is a rational number (P/Q). Note that all integers are considered rational and this test thus succeeds for any term for which PL_is_integer() succeeds. See also PL_get_mpq() and PL_unify_mpq().

int PL_is_float(term_t)

Returns non-zero if term is a float. Note that the corresponding PL_get_float() converts rationals (and thus integers).

int PL_is_callable(term_t)

Returns non-zero if term is a callable term. See callable/1 for details.

int PL_is_compound(term_t)

Returns non-zero if term is a compound term.

int PL_is_functor(term_t, functor_t)

Returns non-zero if term is compound and its functor is functor. This test is equivalent to PL_get_functor(), followed by testing the functor, but easier to write and faster.

int PL_is_list(term_t)

Returns non-zero if term is a compound term using the list constructor or the list terminator. See also PL_is_pair() and PL_skip_list().

int PL_is_pair(term_t)

Returns non-zero if term is a compound term using the list constructor. See also PL_is_list() and PL_skip_list().

int PL_is_dict(term_t)

Returns non-zero if term is a dict. See also PL_put_dict() and PL_get_dict_key().

int PL_is_atomic(term_t)

Returns non-zero if term is atomic (not a variable or compound).

int PL_is_number(term_t)

Returns non-zero if term is an rational (including integers) or float.

int PL_is_acyclic(term_t)

Returns non-zero if term is acyclic (i.e. a finite tree).

12.4.3.2 Reading data from a term

The functions PL_get_*() read information from a Prolog term. Most of them take two arguments. The first is the input term and the second is a pointer to the output value or a term reference. The return value is TRUE or FALSE, indicating the success of the "get" operation. Most functions have a related "_ex" function that raises an error if the argument is the operation cannot be completed. If the Prolog term is not suitable, this is a type, domain or instantiation error. If the receiving C type cannot represent the value this is a representation error.

For integers an alternative interface exists, which helps deal with the various integer types in C and C++. They are convenient for use with _Generic selection or C++ overloading.

int PL_get_atom(term_t +t, atom_t *a)

If t is an atom, store the unique atom identifier over a. See also PL_atom_chars() and PL_new_atom(). If there is no need to access the data (characters) of an atom, it is advised to manipulate atoms using their handle. As the atom is referenced by t, it will live at least as long as t does. If longer live-time is required, the atom should be locked using PL_register_atom().

int PL_get_atom_chars(term_t +t, char **s)

If t is an atom, store a pointer to a 0-terminated C-string in s. It is explicitly not allowed to modify the contents of this string. Some built-in atoms may have the string allocated in read-only memory, so‘temporary manipulation' can cause an error.

int PL_get_string_chars(term_t +t, char **s, size_t *len)

If t is a string object, store a pointer to a 0-terminated C-string in s and the length of the string in len. Note that this pointer is invalidated by backtracking, garbage collection and stack-shifts, so generally the only safe operations are to pass it immediately to a C function that doesn't involve Prolog.

int PL_get_chars(term_t +t, char **s, unsigned flags)

Convert the argument term t to a 0-terminated C-string. flags is a bitwise disjunction from two groups of constants. The first specifies which term types should be converted and the second how the argument is stored. Below is a specification of these constants. BUF_STACK implies, if the data is not static (as from an atom), that the data is pushed on a stack. If BUF_MALLOC is used, the data must be freed using PL_free() when no longer needed.

With the introduction of wide characters (see section 2.19.1), not all atoms can be converted into a char*. This function fails if t is of the wrong type, but also if the text cannot be represented. See the REP_* flags below for details. See also PL_get_wchars().

CVT_ATOM

Convert if term is an atom.

CVT_STRING

Convert if term is a string.

CVT_LIST

Convert if term is a list of of character codes.

CVT_INTEGER

Convert if term is an integer.

CVT_FLOAT

Convert if term is a float. The characters returned are the same as write/1 would write for the floating point number.

CVT_NUMBER

Convert if term is an integer or float.

CVT_ATOMIC

Convert if term is atomic.

CVT_VARIABLE

Convert variable to print-name

CVT_WRITE

Convert any term that is not converted by any of the other flags using write/1. If no BUF_* is provided, BUF_STACK is implied.

CVT_WRITE_CANONICAL

As CVT_WRITE, but using write_canonical/2.

CVT_WRITEQ

As CVT_WRITE, but using writeq/2.

CVT_ALL

Convert if term is any of the above, except for CVT_VARIABLE and CVT_WRITE*.

CVT_EXCEPTION

If conversion fails due to a type error, raise a Prolog type error exception in addition to failure

BUF_DISCARDABLE

Data must copied immediately.

BUF_STACK

Data is stored on a stack. The older BUF_RING is an alias for BUF_STACK. See section 12.4.13.

BUF_MALLOC

Data is copied to a new buffer returned by PL_malloc(3). When no longer needed the user must call PL_free() on the data.

REP_ISO_LATIN_1

Text is in ISO Latin-1 encoding and the call fails if text cannot be represented. This flag has the value 0 and is thus the default.

REP_UTF8

Convert the text to a UTF-8 string. This works for all text.

REP_MB

Convert to default locale-defined 8-bit string. Success depends on the locale. Conversion is done using the wcrtomb() C library function.

int PL_get_list_chars(+term_t l, char **s, unsigned flags)

Same as PL_get_chars(l, s, CVT_LIST|flags), provided flags contains none of the CVT_* flags.

int PL_get_integer(+term_t t, int *i)

If t is a Prolog integer, assign its value over i. On 32-bit machines, this is the same as PL_get_long(), but avoids a warning from the compiler. See also PL_get_long() and PL_get_integer_ex().

int PL_get_long(term_t +t, long *i)

If t is a Prolog integer that can be represented as a long, assign its value over i. If t is an integer that cannot be represented by a C long, this function returns FALSE. If t is a floating point number that can be represented as a long, this function succeeds as well. See also PL_get_int64() and PL_get_long_ex().

int PL_get_int64(term_t +t, int64_t *i)

If t is a Prolog integer or float that can be represented as a int64_t, assign its value over i. See also PL_get_int64_ex().

int PL_get_uint64(term_t +t, uint64_t *i)

If t is a Prolog integer that can be represented as a uint64_t, assign its value over i. Note that this requires GMP support for representing uint64_t values with the high bit set. See also PL_get_uint64_ex().

int PL_get_intptr(term_t +t, intptr_t *i)

Get an integer that is at least as wide as a pointer. On most platforms this is the same as PL_get_long(), but on Win64 pointers are 8 bytes and longs only 4. Unlike PL_get_pointer(), the value is not modified.

int PL_get_bool(term_t +t, int *val)

If t has the value true, false, set val to the C constant TRUE or FALSE and return success, otherwise return failure. The values on, 1, off, const0 and are also accepted.

int PL_get_pointer(term_t +t, void **ptr)

Together with PL_put_pointer() and PL_unify_pointer(), these functions allow representing a C pointer as a Prolog integer. The integer value is derived from the pointer, but not equivalent. The translation aims at producing smaller integers that fit more often in the tagged integer range. Representing C pointers as integers is unsafe. The blob API described in section 12.4.9 provides a safe way for handling foreign resources that cooperates with Prolog garbage collection.

int PL_get_float(term_t +t, double *f)

If t is a float, integer or rational number, its value is assigned over f. Note that if t is an integer or rational conversion may fail because the number cannot be represented as a float.

int PL_get_functor(term_t +t, functor_t *f)

If t is compound or an atom, the Prolog representation of the name-arity pair will be assigned over f. See also PL_get_name_arity() and PL_is_functor().

int PL_get_name_arity(term_t +t, atom_t *name, size_t *arity)

If t is compound or an atom, the functor name will be assigned over name and the arity over arity (either or both may be NULL). See also PL_get_functor() and PL_is_functor().

int PL_get_compound_name_arity(term_t +t, atom_t *name, size_t *arity)

If t is compound term, the functor name will be assigned over name and the arity over arity. This is the same as PL_get_name_arity(), but this function fails if t is an atom.

int PL_get_module(term_t +t, module_t *module)

If t is an atom, the system will look up or create the corresponding module and assign an opaque pointer to it over module.

int PL_get_arg(size_t index, term_t +t, term_t -a)

If t is compound and index is between 1 and arity (inclusive), assign a with a term reference to the argument.

int _PL_get_arg(size_t index, term_t +t, term_t -a)

Same as PL_get_arg(), but no checking is performed, neither whether t is actually a term nor whether index is a valid argument index.

int PL_get_dict_key(atom_t key, term_t +dict, term_t -value)

If dict is a dict, get the associated value in value. Fails silently if key does not appear in dict or if if dict is not a dict.

12.4.3.3 Exchanging text using length and string

All internal text representation in SWI-Prolog is represented using char * plus length and allow for 0-bytes in them. The foreign library supports this by implementing a *_nchars() function for each applicable *_chars() function. Below we briefly present the signatures of these functions. For full documentation consult the *_chars() function.

int PL_get_atom_nchars(term_t t, size_t *len, char **s)

See PL_get_atom_chars().

int PL_get_list_nchars(term_t t, size_t *len, char **s)

See PL_get_list_chars().

int PL_get_nchars(term_t t, size_t *len, char **s, unsigned int flags)

See PL_get_chars().

int PL_put_atom_nchars(term_t t, size_t len, const char *s)

See PL_put_atom_chars().

int PL_put_string_nchars(term_t t, size_t len, const char *s)

See PL_put_string_chars().

int PL_put_list_ncodes(term_t t, size_t len, const char *s)

See PL_put_list_codes().

int PL_put_list_nchars(term_t t, size_t len, const char *s)

See PL_put_list_chars().

int PL_unify_atom_nchars(term_t t, size_t len, const char *s)

See PL_unify_atom_chars().

int PL_unify_string_nchars(term_t t, size_t len, const char *s)

See PL_unify_string_chars().

int PL_unify_list_ncodes(term_t t, size_t len, const char *s)

See PL_unify_codes().

int PL_unify_list_nchars(term_t t, size_t len, const char *s)

See PL_unify_list_chars().

In addition, the following functions are available for creating and inspecting atoms:

atom_t PL_new_atom_nchars(size_t len, const char *s)

Create a new atom as PL_new_atom(), but using the given length and characters. If len is (size_t)-1, it is computed from s using strlen(). See PL_new_atom() for error handling.

const char * PL_atom_nchars(atom_t a, size_t *len)

Extract the text and length of an atom. If you do not need the length, pass NULL as the value of len. If PL_atom_nchars() is called for a blob, NULL is returned.

12.4.3.4 Wide-character versions

Support for exchange of wide-character strings is still under consideration. The functions dealing with 8-bit character strings return failure when operating on a wide-character atom or Prolog string object. The functions below can extract and unify both 8-bit and wide atoms and string objects. Wide character strings are represented as C arrays of objects of the type pl_wchar_t, which is guaranteed to be the same as wchar_t on platforms supporting this type. For example, on MS-Windows, this represents a 16-bit UTF-16 string, while using the GNU C library (glibc) this represents 32-bit UCS4 characters.

atom_t PL_new_atom_wchars(size_t len, const pl_wchar_t *s)

Create atom from wide-character string as PL_new_atom_nchars() does for ISO-Latin-1 strings. If s only contains ISO-Latin-1 characters a normal byte-array atom is created. If len is (size_t)-1, it is computed from s using wcslen(). See PL_new_atom() for error handling.

const pl_wchar_t* PL_atom_wchars(atom_t atom, size_t *len)

Extract characters from a wide-character atom. Succeeds on any atom marked as‘text'. If the underlying atom is a wide-character atom, the returned pointer is a pointer into the atom structure. If the atom is represented as an ISO-Latin-1 string, the returned pointer comes from Prolog's‘buffer stack' (see section 12.4.13).

int PL_get_wchars(term_t t, size_t *len, pl_wchar_t **s, unsigned flags)

Wide-character version of PL_get_chars(). The flags argument is the same as for PL_get_chars(). Note that this operation may return a pointer into Prolog's‘buffer stack' (see section 12.4.13).

int PL_unify_wchars(term_t t, int type, size_t len, const pl_wchar_t *s)

Unify t with a textual representation of the C wide-character array s. The type argument defines the Prolog representation and is one of PL_ATOM, PL_STRING, PL_CODE_LIST or PL_CHAR_LIST.

int PL_unify_wchars_diff(term_t +t, term_t -tail, int type, size_t len, const pl_wchar_t *s)

Difference list version of PL_unify_wchars(), only supporting the types PL_CODE_LIST and PL_CHAR_LIST. It serves two purposes. It allows for returning very long lists from data read from a stream without the need for a resizing buffer in C. Also, the use of difference lists is often practical for further processing in Prolog. Examples can be found in packages/clib/readutil.c from the source distribution.

12.4.3.5 Reading a list

The functions from this section are intended to read a Prolog list from C. Suppose we expect a list of atoms; the following code will print the atoms, each on a line:

foreign_t
pl_write_atoms(term_t l)
{ term_t head = PL_new_term_ref();   /* the elements */
  term_t list = PL_copy_term_ref(l); /* copy (we modify list) */

  while( PL_get_list(list, head, list) )
  { char *s;

    if ( PL_get_atom_chars(head, &s) )
      Sprintf("%s\n", s);
    else
      PL_fail;
  }

  return PL_get_nil(list);            /* test end for [] */
}

Note that as of version 7, lists have a new representation unless the option --traditional is used. see section 5.1.

int PL_get_list(term_t +l, term_t -h, term_t -t)

If l is a list and not the empty list, assign a term reference to the head to h and to the tail to t.

int PL_get_head(term_t +l, term_t -h)

If l is a list and not the empty list, assign a term reference to the head to h.

int PL_get_tail(term_t +l, term_t -t)

If l is a list and not the empty list, assign a term reference to the tail to t.

int PL_get_nil(term_t +l)

Succeeds if l represents the list termination constant.

int PL_skip_list(term_t +list, term_t -tail, size_t *len)

This is a multi-purpose function to deal with lists. It allows for finding the length of a list, checking whether something is a list, etc. The reference tail is set to point to the end of the list, len is filled with the number of list-cells skipped, and the return value indicates the status of the list:

PL_LIST

The list is a‘proper' list: one that ends in the list terminator constant and tail is filled with the terminator constant.

PL_PARTIAL_LIST

The list is a‘partial' list: one that ends in a variable and tail is a reference to this variable.

PL_CYCLIC_TERM

The list is cyclic (e.g. X = [a|X]). tail points to an arbitrary cell of the list and len is at most twice the cycle length of the list.

PL_NOT_A_LIST

The term list is not a list at all. tail is bound to the non-list term and len is set to the number of list-cells skipped.

It is allowed to pass 0 for tail and NULL for len.

12.4.3.6 Processing option lists and dicts

int PL_scan_options(term_t options, int flags, const char* opttype, PL_option_t specs[], ...)

Process an option list as we find with, e.g., write_term/2 and many other builtin predicates. This function takes an option list (or dict) and in the variadic argument list pointers that receive the option values. PL_scan_options() takes care of validating the list, ensuring the list is not cyclic, validating the option type and storing the converted values using the supplied pointers.

Below is an example. While PL_option_t is a struct, its members are initialised using the PL_OPTION() macro. The data structure is not constant because PL_scan_options() adds the option names as atoms to speed up option processing. The macro PL_OPTIONS_END terminates the option list.

static PL_option_t mypred_options[] =
{ PL_OPTION("quoted",   OPT_BOOL),
  PL_OPTION("length",   OPT_SIZE),
  PL_OPTION("callback", OPT_TERM),
  PL_OPTIONS_END
};

static foreign_t
mypred(term_t a1, term_t options)
{ int    quoted   = FALSE;
  size_t length   = 10;
  term_t callback = 0;

  if ( !PL_scan_options(options, 0, "mypred_options", mypred_options,
                        &quoted, &length, &callback) )
    return FALSE;

  <implement mypred>
}

The only defined value for flags is currently OPT_ALL, which causes this function to raise a domain error if an option is passed that is not in specs. Default in SWI-Prolog is to silently ignore unknown options, unless the Prolog flag iso is true. The opttype argument defines the type (group) of the options, e.g., "write_option". Option types are defined by the ISO standard. SWI-Prolog only uses this if OPT_ALL is specified, to raise a domain_error of the indicated type if some option is unused. The type name is normally the name of the predicate followed by _option or the name of a representative of a group of predicates to which the options apply.

Defined option types and their corresponding pointer type are described below.

OPT_BOOL int

Convert the option value to a bool. This converts the values described by PL_get_bool(). In addition, an option without a value (i.e., a plain atom that denotes the option name) can act as a boolean TRUE.

OPT_INT int

OPT_INT64 int64_t

OPT_UINT64 uint64_t

OPT_SIZE size_t

OPT_DOUBLE double

Numeric values of various types. Raises an error if the Prolog value cannot be represented by the C type.

OPT_STRING char*

Uses PL_get_chars() using the flags CVT_ALL|REP_UTF8|BUF_STACK|CVT_EXCEPTION. The buffered string must be guarded using PL_STRINGS_MARK() and PL_STRINGS_RELEASE().

OPT_ATOM atom_t

Accepts an atom. Note that if the C function that implements the predicate wishes to keep hold of the atom after it returns it must use PL_register_atom().

OPT_TERM term_t

Accepts an arbitrary Prolog term. The term handle is scoped by the foreign predicate invocation. Terms can be preserved using PL_record().

The ISO standard demands that if an option is repeated the last occurance holds. This implies that PL_scan_options() must scan the option list to the end.

12.4.3.7 An example: defining write/1 in C

Figure 6 shows a simplified definition of write/1 to illustrate the described functions. This simplified version does not deal with operators. It is called display/1, because it mimics closely the behaviour of this Edinburgh predicate.

foreign_t
pl_display(term_t t)
{ functor_t functor;
  int arity, len, n;
  char *s;

  switch( PL_term_type(t) )
  { case PL_VARIABLE:
    case PL_ATOM:
    case PL_INTEGER:
    case PL_FLOAT:
      PL_get_chars(t, &s, CVT_ALL);
      Sprintf("%s", s);
      break;
    case PL_STRING:
      PL_get_string_chars(t, &s, &len);
      Sprintf("\"%s\"", s);
      break;
    case PL_TERM:
    { term_t a = PL_new_term_ref();

      PL_get_name_arity(t, &name, &arity);
      Sprintf("%s(", PL_atom_chars(name));
      for(n=1; n<=arity; n++)
      { PL_get_arg(n, t, a);
        if ( n > 1 )
          Sprintf(", ");
        pl_display(a);
      }
      Sprintf(")");
      break;
    default:
      PL_fail;                          /* should not happen */
    }
  }

  PL_succeed;
}